Mounts
Mounting solutions for today’s technology devices.
-
Bose Videobar VB1 Mount
AVTEQ’s mount for the Bose Videobar VB1 brings mobility and flexibility to your meeting spaces. The mount is designed to install the Bose VB1 above or below a single display or dual displays on any of our mobile AV carts or collaborative furniture. This added flexibility lets you easily adjust the meeting room for improved collaboration.
The mount provides a display adapter that supports the following display sizes:
- 32-55 inch
- 60-75 inch
- 80-90 inch
The Bose VB1 mount is compatible with all AVTEQ display mounts and attaches the videobar between the display and mount. In addition to AVTEQ mobile carts, the mount also is compatible with AVTEQ TEAMhuddle tables and credenzas.
-
Camera Floor Stand
The Camera Floor Stand supports most video bars and PTZ cameras, including the Yealink MeetingBar, Poly Studio X series, Logitech Meetup, and the Meeting Owl. The stand is adjustable from 25-42 inches and is perfect for classrooms, multi-use collaboration areas, and ad hoc spaces. It’s sturdy, free-standing design makes it easy to move and place the stand where needed.
-
Cisco Room Navigator Rack Mount
The Avteq Cisco Room Navigator Rack Mount is designed to safely secure the Room Navigator touch panel to the Avteq RPS-500 mobile cart or other rack component.
The mount attaches to the rack rails on the RPS-500 and may be positioned above or below the standard rack shelf, or may replace the shelf. The Room Navigator mount works with any 19” rack and can be adjusted to tilt for improved viewing and usability.
-
Cisco Webex Room Navigator Wall Mounts
The Cisco Webex Room Navigator control unit provides touch control access to several room controls, such as: controlling Cisco videoconferencing systems, booking a room, and controlling amenities within the room. Mounting the Cisco Webex Room Navigator on a wall provides easy access to launch and end video and/or audio conference meetings. In addition, wall mounts help prevent theft and misplaced units.
AVTEQ offers two wall mounting solutions that are compatible with a table-stand unit or a wall-mounted unit the Cisco Webex Room Navigator:
- In-wall mount (CN-WMP)
- Surface wall mount (CN-SM)
The in-wall box offers added security and easy access for users in any room. The in-wall box is designed to offer a flush mounting of the Cisco Webex Room Navigator unit for post or pre-construction.
The surface wall mount is installed directly on the surface of the wall or attached to a 1-gang or 2-gang wall box. Once the mount is installed, the Cisco Webex Room Navigator unit easily slides into the mount and is secured with a set screw at the bottom of the mount.
Cisco Webex device certified and compatible with the Webex Collaborative Workplace ecosystem. -
Dual Large Format Display Mount
The Dual Large Format Display Mount is designed to support dual 82- to 98-inch* displays. The heavy gauge steel ensures the mount does not bend from the weight of extra-large displays. The Dual Large Display mount is compatible with the following Avteq products:
* For displays larger than 86 inches, please contact your Avteq sales representation to ensure compatibility
-
Logitech Tap IP In-Wall Mount
Add security and easy access to the Logitech Tap IP meeting room control panel with Avteq’s in-wall mount. The in-wall box allows all cabling to run through the walls, eliminating the need to find a power source or have cables running on tables and floors.
The Logitech Tap IP in-wall mount provides a flush-mounted installation for post or pre-construction. The in-wall box comes standard in a glossy white finish.
-
Logitech Tap Wall Mount
The Logitech Tap wall mount is compatible with the Tap and Tap IP meeting control panel. The wall mount provides access to the Tap touch controls within meeting rooms or in hallways and open areas.
The mount can be installed directly on the wall or attached to a 1-gang or 2-gang wall box for in-wall wiring applications Once the mount is installed, the Tap panel can easily be removed for tabletop access. The Logitech Tap wall mount comes standard in black.
-
Mersive Solstice Pod Mount
The Mersive Solstice Pod mount securely supports the device on a wall, display mount, or desk. The Solstice Pod easily slides into the mount and then is secured with security screws.
The Avteq mount allows access to the device’s ports without keeping it on a shelf or tabletop. Install the Mersive Solstice Pod to the wall, behind the display, or under a desk or tabletop.
-
Security Display Enclosure for the Poly X30
The Security Display Enclosures are designed to protect the audio visual technology and prevent anyone from using the hardware to inflict harm to themselves or others. The wall-mounted enclosure is customized specifically to support the Poly Studio X30 video bar along with a 32” or 43” display. The enclosure provides a safe and secure solution to mount the Poly Studio X30 and display in environments where the need for a safe video conferencing solution is essential, such as correctional or mental health facilities.
The sloped top provides a non-looping enclosure that reduces the chance of the enclosure becoming a ligature point. All cabling and power access can be protected by the cover for maximum safety.
-
Yealink MTouch In-Wall Mount
The Yealink In-Wall Mount supports either the MTouch or CPT18 touch panels. The wall mount is designed for in-wall wiring installations and secures the Yealink touch panel within the box.
Avteq’s Yealink In-Wall Mount provides added security from possible damage or loss of the unit and offers easy access to the touch screen controller for maximum usability. In addition, the in-wall box can be used for post or pre-construction installations. The wall mount comes standard in a glossy white finish.
-
Cisco Room Camera Mounts
Add mobility to your Cisco® Room camera with our custom mounts for mobile display stands. The Cisco® Room camera mounts let you quickly install a Room Kit, Room Kit Plus, or the Room Kit Mini on AVTEQ’s display mounts, mobile stands, and wall-mounted stands. These custom mounts make it easy to position the Room video bar above or below a display.
The Cisco Room cameras bring your small or large meeting rooms to life. When mounted on a mobile stand, the collaboration system brings the flexibility to adjust the environment to fit the needs of the team meeting. For small huddle spaces, a mobile solution allows the camera to be moved to fit the size and location of the audience. You are no longer dependent on a wall-mounted solution.
The Cisco Room camera mounts are available as a bracket, or bundled with the AVTEQ universal display mount, which supports a single display up to 90″.
It is compatible with the following Cisco cameras:
- Cisco Room Kit
- Cisco Room Kit Mini
- Cisco Room Kit Plus
- Cisco Room Bar (Available first quarter for BLW)
- Cisco Room Kit EQ
Installing the Cisco Room camera mounts on a mobile stand enhances the Cisco experience by providing mobility and flexibility in collaborative work environments.
-
DynamiQ mMount Motorized Height Adjustable Mount
The DynamiQ™ mMount provides height adjustable capabilities with a motorized wall mounting system. The double-column design provides the stability needed to work with large interactive touchscreens up to 86”.
The wired remote controller may be placed at a convenient and easy-to-reach location, allowing the user to adjust the height of the screen safely and quietly. The motorized mount has an anti- collision feature to prevent accidental pinching, when the system is moving and senses an obstruction it will stop and retreat. In its lowest position, the monitor allows easy access for users in wheelchairs.
A lockbox is located on the back of the VESA mounting box, which safely stores the electric controls. The lockbox also may be used for a mini PC or other small equipment.
With the optional accessories, the product may be equipped for use with a laptop or keyboard tray, teleconferencing equipment, camera, or sound bar.
Contact AVTEQ to discuss custom solutions.
-
DynamiQ 400 Height Adjustable Mount
The DynamiQ™ 400 height adjustable wall mount is the perfect solution for interactive touch panels in the classroom and other collaborative spaces. The mount is compatible with most interactive panels and supports VESA patterns from 200×200 up to 800×600.
The DynamiQ 400 wall mount uses spring technology to support the display and provides easy glide vertical movement with a slight manual touch. The height-adjustable mount supports 15.75″ of vertical movement and supports displays from 40 to 209 lbs.
-
DynamiQ 650 Height Adjustable Wall Mount
The DynamiQ™ 650 is the perfect height adjustable mount to move your large interactive touch screen displays up and down. This mechanical wall lift has a weight capacity up to 356 lbs in a compact design that will be hidden behind the screen. Interface brackets for all screen sizes, a floor support and a mobile frame are available as accessories.
-
PTZ Wall Mount
The Avteq PTZ Wall Mount supports any PTZ camera with a 1/4”-20 interface. The mount is designed to install directly to a wall or a single-gang wall box and position the camera above or below a display. The camera mount is made from heavy gauge steel.
-
Poly Studio Mount Bracket
Add mobility to your Poly Studio experience with AVTEQ’s Poly Studio Mount Bracket for mobile stands. Our custom mount bracket lets you quickly position the Poly Studio video bar above or below the display and supports:
Create dynamic, flexible huddle areas and allow your employees to adjust the space for maximum collaboration.
Contact AVTEQ to discuss custom solutions.
-
Cisco Touch 10 Surface Wall Mount
The Cisco Touch 10 Surface Wall Mount is designed for the Cisco Touch 10 control unit for MX, SX, Board, and Room Series.
The mount is installed directly on the surface of the wall or attached to a 1-gang or 2-gang wall box. Once the mount is installed, the Touch 10 unit easily slides into the mount and is secured with a set screw at the bottom of the mount. The Touch 10 Surface Mount is available in white.
If you prefer to install your Touch 10 unit flush to the wall, AVTEQ offers an in-wall mount.
Cisco Webex Device certified and compatible with the Webex Collaborative Workplace.
Cisco Webex Device certified and compatible with the Webex Collaborative Workplace. -
Cisco Touch 10 In-Wall Mount
The Cisco Touch 10 In-Wall Mount is designed specifically for the Cisco Touch 10 control unit for MX, SX, Webex Board, and Webex Room Series. The in-wall box offers added security and easy access for users in any room. In addition, the in-wall box is designed to offer a flush mounting of the Cisco unit for post or pre-construction. The Cisco Touch 10 In-Wall Mount is available in a glossy white finish.
Cisco Webex Device certified and compatible with the Webex Collaborative Workplace. -
Poly GC8 In-Wall Mount
Poly GC8 in-wall mount adds security and accessibility to the GC8 panel in your Microsoft Teams rooms. The GC8 panel is compatible with the Poly G10-T, Poly G40-T, and Poly G85-T.
Wall mounting the GC8 prevents possible damage and loss of the unit and provides easy access to the touch screen controller for maximum usability. The mount is designed for post or pre-construction applications. Due to the depth of the GC8 panel, the faceplate provides a one-inch deep edge around the in-wall box to accommodate the unit. The Poly GC8 wall mount comes standard in a glossy white finish.
For more information about other Poly mounting solutions, see our Poly Solutions page.
-
Poly TC8 Wall Mounts
Poly TC8 mounts are available in an in-wall or surface wall mount model. These mounts add security and reliability to your TC8 panel which works seamlessly with the Poly Studio X family and G7500. The Poly in-wall box is designed specifically for the Poly TC8 touch panel.
Installing the TC8 on the wall prevents possible damage and loss of the unit and provides easy access to the touch screen controller for maximum usability. The panel fits securely inside the in-wall box. In addition, the in-wall box provides a flush mounting for post or pre-construction. The in-wall box comes standard in a glossy white finish.
AVTEQ also offers a surface wall mount that is installed directly on the wall or attached to a 1-gang or 2-gang wall box. Once the mount is installed, the TC8 panel easily slides into the mount and is secured with a set screw at the bottom of the mount. The surface mount comes standard in black.
For more information about other Poly products, see our Poly Solutions page.
-
LED-1
For a more low-profile wall mount, this solution is ideal for LED displays from 40″ to 70″. Mounting system includes a bubble level for best installation results.
-
Cisco Webex Board Mounting Kit
The Cisco® Webex Board Mounting Kit is certified compatible with the Cisco® Webex Board and Webex Board Pro series:
- Webex Board 55
- Webex Board Pro 55
- Webex Board 70
- Webex Board Pro 75
- Webex Board 85
The mounting kit allows for wall mounting or installed on an AVTEQ mobile cart or stand. The Webex Mounting Kit is integrated with select products including:
- RPS-500 mobile display cart
- DynamiQ RPS-500 height-adjustable mobile cart
- DynamiQ Wall Stand height-adjustable wall stand
- DynamiQ 400 height-adjustable wall mount
- MAX mobile cart for large displays
The Webex Board Mounting Kit also can replace the standard display mount on AVTEQ’s credenzas.
To see all of our Webex-certified mounting solutions, visit our Cisco Webex Solutions.
Cisco Webex Device certified and compatible with the Webex Collaborative Workplace. -
Universal Single Display Wall Mount 45-98 Inch Displays
AVTEQ’s UM-1 single display wall mount gives you the flexibility you need to securely wall mount single displays up to 98″. The UM-1 easily adjusts to support a single display from 40″ to 98″ and keeps the display within 2 inches of the wall.
The UM-1T provides a 15-degree tilt.
The UM-1 single display mount comes standard on AVTEQ’s mobile carts, stands, and credenzas. For dual displaying mounting, please see our UM-2 dual display mount.
-
PS-50
AVTEQ’s PS-50 includes a 24″ back plate and one videoconferencing camera shelf. Camera shelf can be positioned vertically between displays on AVTEQ’s “L” carts and dual mounts to achieve an eye-to-eye perspective. Camera shelf can be positioned below displays on RPS & GMP series carts mounted with a 50″ or smaller displays or will work on wall mounted displays.