800-285-8315

cisco

Showing all 17 results

  • cradle for Cisco Room Navigator

    Cisco Room Navigator Cradle

    Avteq’s Cisco Room Navigator Cradle is designed for the ELT-2000 floor stand and ELT-2100 mobile cart and easily is mounted on the front panel.   The Room Navigator Cradle provides easy access to the Room Navigator touch panel during a meeting.  The cradle also provides a secure place to keep the Room Navigator while moving the ELT-2100.

    The Cisco Room Navigator Cradle slides over the front edge of the ELT-2000 or ELT-2100 and locks in place using the knob at the back of the cradle.

     

  • Cisco Room Navigator Rack Mount

    The Avteq Cisco Room Navigator Rack Mount is designed to safely secure the Room Navigator touch panel to the Avteq RPS-500 mobile cart or other rack component.  

    The mount attaches to the rack rails on the RPS-500 and may be positioned above or below the standard rack shelf, or may replace the shelf. The Room Navigator mount works with any 19” rack and can be adjusted to tilt for improved viewing and usability.

     

     

  • in-wall and surface mounts for Webex Room Navigator

    Cisco Room Navigator Wall Mounts

    The Cisco Room Navigator control unit provides touch control access to several room controls, such as: controlling Cisco videoconferencing systems, booking a room, and controlling amenities within the room.  Mounting the Cisco Room Navigator on a wall provides easy access to launch and end video and/or audio conference meetings.  In addition, wall mounts help prevent theft and misplaced units.

    AVTEQ offers two wall mounting solutions that are compatible with a table-stand unit or a wall-mounted unit the Cisco Room Navigator:

    • In-wall mount (CN-WMP)
    • Surface wall mount (CN-SM)

    The in-wall box offers added security and easy access for users in any room.  The in-wall box is designed to offer a flush mounting of the Cisco Room Navigator unit for post or pre-construction.

    The surface wall mount is installed directly on the surface of the wall or attached to a 1-gang or 2-gang wall box.  Once the mount is installed, the Cisco Room Navigator unit easily slides into the mount and is secured with a set screw at the bottom of the mount.

     

     

  • webex room kit mount

    Cisco Room Camera Mounts

    Add mobility to your Cisco® Room camera with our custom mounts for mobile display stands. The Cisco® Room camera mounts let you quickly install a Room Kit, Room Kit Plus, or the Room Kit Mini on AVTEQ’s display mounts, mobile stands, and wall-mounted stands. These custom mounts make it easy to position the Room video bar above or below a display.

    The Cisco Room cameras bring your small or large meeting rooms to life.  When mounted on a mobile stand, the collaboration system brings the flexibility to adjust the environment to fit the needs of the team meeting.  For small huddle spaces, a mobile solution allows the camera to be moved to fit the size and location of the audience.  You are no longer dependent on a wall-mounted solution.

    The Cisco Room camera mounts are available as a bracket, or bundled with the AVTEQ universal display mount, which supports a single display up to 90″.

    It is compatible with the following Cisco cameras:

    • Cisco Room Kit
    • Cisco Room Kit Mini
    • Cisco Room Kit Plus
    • Cisco Room Bar (Available first quarter for BLW)
    • Cisco Room Kit EQ

    Installing the Cisco Room camera mounts on a mobile stand enhances the Cisco experience by providing mobility and flexibility in collaborative work environments.

     

  • DynamiQ RPS-500 with Cisco Webex Board Pro 55

    DynamiQ RPS-500 Height Adjustable Cart – Cisco Boards

    The height-adjustable DynamiQ RPS-500 mobile cart for Cisco Boards is an ideal solution for hybrid and collaborative environments.  The spring-weighted, height-adjustable mount allows the Cisco Board to effortlessly glide vertically by 15.75 inches with a slight touch of the hand.

    The DynamiQ RPS-500 supports the following Cisco Boards:

    • Cisco Board 55
    • Cisco Board Pro 55
    • Cisco Board 70
    • Cisco Board Pro 75

    In addition, the DynamiQ RPS-500 provides an adjustable rack-mounted shelf that is ideal for small laptops, touch panels, or other devices.

     

     

  • DynamiQ mCart Height Adjustable Motorized Cart

    The DynamiQ™ mCart is a height adjustable flat panel mobile cart with motorized height adjustable capabilities. The double-column design provides the stability needed to work with large interactive displays up to 86”.

    The wired remote controller may be placed at a convenient and easy-to-reach location, allowing the user to adjust the height of the screen safely and quietly. The motorized stand has an anti- collision feature to prevent accidental pinching, when the system is moving and senses an obstruction it will stop and retreat. In its lowest position, the monitor allows easy access for users in wheelchairs.

    A lockbox is located on the back of the VESA mounting box, which safely stores the electric controls. The lockbox also may be used for a mini PC or other small equipment.

    With the optional accessories, the product may be equipped for use with a laptop or keyboard tray, teleconferencing equipment, camera, or soundbar.

     

     

  • DynamiQ mCart II

    DynamiQ mCart II Height Adjustable Motorized Cart

    The DynamiQ™ mCart II provides motorized height adjustable capabilities. The double-column design provides the stability needed to work with large interactive touchscreens up to 98 inches.

    The wired remote controller may be placed at a convenient and easy-to-reach location, allowing the user to adjust the height of the screen safely and quietly. The motorized stand has a dual anti- collision safety feature to prevent accidental pinching, when the system is moving and senses an obstruction it will stop and retreat. In its lowest position, the monitor allows easy access for users in wheelchairs.

    A lockbox is located on the back of the VESA mounting box, which safely stores the electric controls. The lockbox also may be used for a mini PC or other small equipment.

    With the optional accessories, the product may be equipped for use with a laptop or keyboard tray, teleconferencing equipment, camera, or soundbar.

     

     

  • DynamiQ mMount Motorized Height Adjustable Mount

    The DynamiQ™ mMount provides height adjustable capabilities with a motorized wall mounting system. The double-column design provides the stability needed to work with large interactive touchscreens up to 86”.

    The wired remote controller may be placed at a convenient and easy-to-reach location, allowing the user to adjust the height of the screen safely and quietly. The motorized mount has an anti- collision feature to prevent accidental pinching, when the system is moving and senses an obstruction it will stop and retreat. In its lowest position, the monitor allows easy access for users in wheelchairs.

    A lockbox is located on the back of the VESA mounting box, which safely stores the electric controls. The lockbox also may be used for a mini PC or other small equipment.

    With the optional accessories, the product may be equipped for use with a laptop or keyboard tray, teleconferencing equipment, camera, or sound bar.

    GEAR Box-sm Contact AVTEQ to discuss custom solutions.

     

  • DynamiQ mTilt Motorized Height Adjustable Cart

    The DynamiQ™ mTilt is height adjustable tilting mobile cart with motorized height adjustable capabilities. The double-column design provides the stability needed to work with large interactive touchscreens up to 75”.

    The wired remote controller may be placed at a convenient and easy-to-reach location, allowing the user to adjust the height of the screen safely and quietly. The 26” travel will guarantee full screen access for all users, while the 90-degree tilt feature will allow multiple users to access the screen at the same time. The motorized stand has an anti-collision feature to prevent accidental pinching, when the system is moving and senses an obstruction it will stop and retreat. In it’s lowest position, the monitor allows easy access for users in wheelchairs.

    A lockbox is located on the back of the VESA mounting box, which safely stores the electric controls. The lockbox also may be used for a mini PC or other small equipment.

     

     

  • height adjustable DynamiQ 400 wall mount

    DynamiQ 400 Height Adjustable Mount

    The DynamiQ™ 400 height adjustable wall mount is the perfect solution for interactive touch panels in the classroom and other collaborative spaces.  The mount is compatible with most interactive panels and supports VESA patterns from 200×200 up to 800×600.

    The DynamiQ 400 wall mount uses spring technology to support the display and provides easy glide vertical movement with a slight manual touch.  The height-adjustable mount supports 15.75″ of vertical movement and supports displays from 40 to 209 lbs.

     

  • DynamiQ Executive Height Adjustable Cart for Cisco Boards

    The DynamiQ™ Executive Cart height adjustable mobile cart includes mounts for Cisco Boards.  The sleek style and height-adjustable functionality are perfect for a large flat-panel display up to 75″ or 254 lbs. The DynamiQ Executive Cart is ADA compliant.  It is an ideal solution for collaborative spaces in corporate offices and educational environments.

    The electric height adjustable mobile stand is powered by an electric lift, allowing you to raise and lower the display with up to 20” of vertical movement. You can easily adjust the height using the control panel on the side of the stand. In addition, an optional wireless controller is available to maximum usability.  The DynamiQ Executive Cart supports the following Cisco Boards:

    • Cisco Board 55
    • Cisco Board Pro 55
    • Cisco Board 70
    • Cisco Board Pro 75

    The DynamiQ Executive Cart has a tempered, tinted front glass door that provides access to 3RU of vertical rack space and cable management. The mobile cart offers three standard laminate finishes with a decorative front panel.  You also may customize the panel by choosing from a wide selection of laminate or veneer finishes.

  • height adjustable mobile stand

    DynamiQ Executive Height Adjustable Motorized Cart

    The DynamiQ Executive Cart provides height-adjustable functionality to maximize mobility with large flat panel displays. The ADA-compliant DynamiQ Executive Cart is a perfect solution for collaborative, multi-use environments that allow users the flexibility they need for team productivity.

    The motorized mount, powered by an electric lift, allows the user to raise and lower a single display up to 75” or 254 lbs. The control panel, located on the side of the cart, provides easy access to adjust the height of the display with up to 20” of vertical movement.

    The front panels are available in three standard finishes or customized from a large selection of laminate or veneer finishes. A removable back panel provides access to 3RU of vertical rack space and cable management.

     

     

     

  • Crestron TSS tablet floor stand

    SDS Tablet Floor Stand

    The SDS Table Floor stand is a stylish tablet kiosk that is perfect for open area meeting rooms, lobby displays, temperature check-in areas, and other spaces where wall mounting is not an option.  It’s sturdy, free-standing design makes it easy to move and place the stand where needed. The removable back panel provides secure access for any cables to support the device.

     

     

  • TMP-300 Telemedicine Cart

    The compact TMP-300 telemedicine cart offers a perfect blend of functionality and design for caregivers in hospitals or small clinics.  The TMP-300 has a small footprint and smooth gliding casters that easily travel across a carpet or hard surface floors.

    This highly customizable cart supports a single display and accommodates a variety of technologies to provide the ultimate telemedicine solution.  The TMP-300 provides an adjustable video conferencing camera shelf, a pull-out drawer, and a large locking storage area.  The TMP-300 telemedicine cart integrates a wide range of technology to bring remote physicians right to the side of the patient.

    The TMP-300 also supports the following Cisco Webex solutions:

    AVTEQ’s telemedicine carts are easily cleaned using the most commonly used hospital-grade, diluted, non-abrasive, and non-corrosive solutions including ammonia enzyme cleaners, hydrogen peroxide, bleach, or alcohol solutions.

     

     

  • Custom bracket to mount Cisco Webex DX80 panel

    Webex DX80 Mount

    The Webex DX80 Mount for mobile stands makes it easy to take your team collaboration to new levels. The mounting bracket is designed specifically for the Cisco® Webex DX80.  The mounting bracket offers a secure mounting solution for the 23″ touch panel display.  The Webex DX80 Mount is compatible with a standard 100×100 or 75×75 VESA mount.

    With the growing need for telemedicine, the Webex DX80 and our TMP-200 telemedicine cart make a powerful solution for healthcare facilities.  The small footprint of the TMP-200 paired with the collaborative features of the DX80 provide an ideal telemedicine solution.

    See our Cisco Webex Solutions for more information about our full line of Cisco-related products.

    Cisco Webex Device certified and compatible with the Webex Collaborative Workplace.

     

  • AVTEQ Max Cart mobile stand for large displays

    MAX Cart for the Cisco Board 85

    The MAX Cart for the Cisco Board 85 is a reliable and dependable mobile stand this is certified by Cisco.  The MAX Cart is designed to support the Board 85 or a single display up to 325 lbs. The side handles provide maximum stability and ease when moving the cart across various flooring.

    The MAX Cart also is available with the custom mount kit for the Cisco® Board 85.

    Visit our Cisco Solutions page for more information about other AVTEQ products.

    *If you have a display larger than 98 inches, please contact your AVTEQ representative for more information.

     

  • Cisco Board Mounting Kit

    The Cisco® Board Mounting Kit is certified compatible with the Cisco® Board and Cisco Board Pro series:

    • Cisco Board 55
    • Cisco Board Pro 55
    • Cisco Board 70
    • Cisco Board Pro 75
    • Cisco Board 85

    The mounting kit allows for wall mounting or installed on an AVTEQ mobile cart or stand.  The Cisco Mounting Kit is integrated with select products including:

    The Cisco Board Mounting Kit also can replace the standard display mount on AVTEQ’s credenzas.