wall mount

Showing all 13 results

• 

  Cisco Room Navigator Wall Mounts

  The Cisco Room Navigator touch panel provides touch control access to several room controls, such as: controlling Cisco videoconferencing systems, booking a room, and controlling amenities within the room.  Mounting the Cisco Room Navigator on a wall provides easy access to launch and end video and/or audio conference meetings.  In addition, wall mounts help prevent theft and misplaced units.

  Avteq offers two wall mounting solutions that are compatible with a table-stand unit or a wall-mounted unit the Cisco Room Navigator:

  • In-wall mount (CN-WMP)
  • Surface wall mount (CN-SM)

  The in-wall box offers added security and easy access for users in any room. The in-wall box fits within a standard wall depth and the faceplate secures the Cisco Room Navigator. The mount works with pre-construction or post.

  The surface wall mount is installed directly on the surface of the wall or attached to a 1-gang or 2-gang wall box.  Once the mount is installed, the Cisco Room Navigator touch panel easily slides into the mount and is secured with a set screw at the bottom of the mount.

  Certifications:

   
• 

  Logitech Tap Wall Mount

  The Logitech Tap wall mount is compatible with the Logitech Tap and Logitech Tap IP meeting room touch controller. The wall mount provides access to the Tap touch controls within meeting rooms or in hallways and open areas.

  The mount can be installed directly on the wall or attached to a 1-gang or 2-gang wall box for in-wall wiring applications. Once the mount is installed, the Tap panel can easily be removed for tabletop access. The Logitech Tap wall mount comes standard in black.

  Certifications:

   
• 

  Mersive Solstice Pod Mount

  The Mersive Solstice Pod mount securely supports the Solstice Pod on a wall, display mount, or desk. The Solstice Pod easily slides into the mount and then is secured with security screws.

  The Avteq mount allows access to the device’s ports without keeping it on a shelf or tabletop. Install the Mersive Solstice Pod to the wall, behind the display, or under a desk or tabletop.

  Certifications:

   
• 

  Yealink MTouch In-Wall Mount

  The Yealink In-Wall Mount supports either the MTouch or CPT18 touch panels. The wall mount is designed for in-wall wiring installations and secures the Yealink touch panel within the box.

  Avteq’s Yealink In-Wall Mount provides added security from possible damage or loss of the unit and offers easy access to the touch screen controller for maximum usability. In addition, the in-wall box can be used for post or pre-construction installations. The wall mount comes standard in a glossy white finish.

  Certifications:

   
• 

  Neat Frame Wall Mount

  Add security and easy access to the Neat Frame with Avteq’s Neat Frame Wall Mount. Wall mounting the Neat Frame prevents possible damage and loss of the unit and provides easy access to the device for maximum usability.

  The Neat Frame Wall Mount provides a flush-mounted installation for post or pre-construction. The in-wall box comes standard in a powder black finish.

  In addition, we also offer a Floor Stand for the Neat Frame.

  Certifications:

   
• 

  DynamiQ BalanceBox 400 Height Adjustable Display Wall Mount

  The DynamiQ™ BalanceBox 400 height adjustable wall mount is the perfect solution for interactive touch panels in the classroom and other collaborative spaces.  The mount is compatible with most interactive panels and supports VESA patterns from 200×200 up to 800×600.

  The DynamiQ BalanceBox 400 wall mount uses spring technology to support the display and provides easy glide vertical movement with a slight manual touch.  The height-adjustable mount supports 15.75″ of vertical movement and supports displays from 50 to 209 lbs.

  Certifications:

   
• 

  DynamiQ BalanceBox 650 Height Adjustable Display Wall Mount

  The DynamiQ™ BalanceBox 650 Height Adjustable Display Wall Mount is the perfect height adjustable solution to move your large interactive touch screen displays up and down. This mechanical wall lift has a weight capacity up to 357 lbs in a compact design that will be hidden behind the screen. Interface brackets for all screen sizes, a floor support and a mobile frame are available as accessories.

  Certifications:

   
• 

  PTZ Camera Wall Mount

  The Avteq PTZ Wall Mount supports any PTZ camera with a 1/4”-20 interface. The mount is designed to install directly to a wall or a single-gang wall box and position the camera above or below a display. The camera mount is made from heavy gauge steel.

  Certifications:

   
• 

  Cisco Touch 10 Surface Wall Mount

  The Cisco Touch 10 Surface Wall Mount is designed for the Cisco Touch 10 control unit for MX, SX, Board, and Room Series.

  The mount is installed directly on the surface of the wall or attached to a 1-gang or 2-gang wall box.  Once the mount is installed, the Touch 10 unit easily slides into the mount and is secured with a set screw at the bottom of the mount.  The Cisco Touch 10 Surface Mount is available in white.

  Certifications:

   
• 

  Poly GC8 Wall Mounts

  Poly GC8 mounts are available in an in-wall or surface wall mount model. These mounts add security and reliability to your GC8 Touch Controller which works seamlessly with the Poly Studio X family and G7500. Poly GC8 in-wall mount adds security and accessibility to the GC8 touch controller in your Microsoft Teams rooms. The GC8 panel is compatible with the Poly G10-T, Poly G40-T, and Poly G85-T.

  Installing the GC8 touch controller on the wall prevents possible damage and loss of the unit and provides easy access to the touch screen controller for maximum usability. The panel fits securely inside the in-wall box. In addition,  the in-wall box fits within a standard wall depth and the faceplate secures the GC8 panel. The mount works with pre-construction or post and comes standard in a glossy white finish.

  Avteq also offers a surface wall mount that is installed directly on the wall or attached to a 1-gang or 2-gang wall box. Once the mount is installed, the GC8 panel easily slides into the mount and is secured with a set screw at the bottom of the mount. The surface mount comes standard in black.

  For more information about other Poly mounting solutions, see our Poly Solutions page.

  Certifications:

   
• 

  Poly TC10 In-Wall Mount

  Avteq offers a Poly in-wall mount model designed specifically for the Poly TC10 Touch Controller. The Poly TC10 In-Wall Mount adds security and reliability to your TC10 panel which works seamlessly with the Poly Studio X family and G7500.

  Installing the TC10 on the wall prevents possible damage and loss of the unit and provides easy access to the touch screen controller for maximum usability. The panel fits securely inside the in-wall box. The in-wall box fits within a standard wall depth and the faceplate secures the TC10 panel. The mount works with pre-construction or post and comes standard in a glossy white finish.

  For more information about other Poly products, see our Poly Solutions page.

  Certifications:

   
• 

  Poly TC8 Wall Mounts

  Poly TC8 mounts are available in an in-wall or surface wall mount model. These mounts add security and reliability to your Poly TC8 Touch Controller which works seamlessly with the Poly Studio X family and G7500.

  Installing the TC8 on the wall prevents possible damage and loss of the unit and provides easy access to the touch screen controller for maximum usability. The panel fits securely inside the in-wall box. The in-wall box fits within a standard wall depth and the faceplate secures the TC8 panel. The mount works with pre-construction or post and comes standard in a glossy white finish.

  Avteq also offers a surface wall mount that is installed directly on the wall or attached to a 1-gang or 2-gang wall box.  Once the mount is installed, the TC8 panel easily slides into the mount and is secured with a set screw at the bottom of the mount.  The surface mount comes standard in black.

  For more information about other Poly products, see our Poly Solutions page.

  Certifications:

   
• 

  LED-1 Single Display Wall Mount

  For a more low-profile wall mount, the LED-1 Single Display Wall Mount is an ideal solution for displays from 40″ to 70″. The mounting system includes a bubble level for the best installation results.

  Certifications: