800-285-8315

Mounts

Mounting solutions for today’s technology devices.

TYPE

BRAND

DISPLAY SIZE

VESA PATTERN

  • Camera Floor Stand CAMERA-STAND-CRK Height Adjusted with Cisco camera

    Camera Floor Stand

    The Camera Floor Stand supports the leading PTZ cameras and select video bars including the Cisco Room series, Poly Studio series, Logitech MeetUp and more. The stand is adjustable from 25-42 inches and is perfect for classrooms, multi-use collaboration areas, and ad hoc spaces.

    Its sturdy, free-standing design makes it easy to move to position the camera where needed, while offering infinite camera angle options. The stand’s small footprint reduces tripping concerns compared to standard tripod stand and makes it easy to store the stand without having to remove the camera.

     

  • CN-RM Cisco Navigator Rack Mount Full Assembly Front

    Cisco Room Navigator Rack Mount

    The Avteq Cisco Room Navigator Rack Mount is designed to safely secure the Room Navigator touch panel to the Avteq RPS-500 mobile cart or other rack component.  

    The mount attaches to the rack rails on the RPS-500 and may be positioned above or below the standard rack shelf, or may replace the shelf. The Room Navigator mount works with any 19” rack and can be adjusted to tilt for improved viewing and usability.

     

     

  • in-wall and surface mounts for Cisco Room Navigator Cameras

    Cisco Room Navigator Wall Mounts

    The Cisco Room Navigator control unit provides touch control access to several room controls, such as: controlling Cisco videoconferencing systems, booking a room, and controlling amenities within the room.  Mounting the Cisco Room Navigator on a wall provides easy access to launch and end video and/or audio conference meetings.  In addition, wall mounts help prevent theft and misplaced units.

    AVTEQ offers two wall mounting solutions that are compatible with a table-stand unit or a wall-mounted unit the Cisco Room Navigator:

    • In-wall mount (CN-WMP)
    • Surface wall mount (CN-SM)

    The in-wall box offers added security and easy access for users in any room. The in-wall box fits within a standard wall depth and the faceplate secures the Cisco Room Navigator. The mount works with pre-construction or post.

    The surface wall mount is installed directly on the surface of the wall or attached to a 1-gang or 2-gang wall box.  Once the mount is installed, the Cisco Room Navigator unit easily slides into the mount and is secured with a set screw at the bottom of the mount.

     

     

  • VPMU-100L-120 Dual Large Format Display Mount

    Dual Large Format Display Mount

    The Dual Large Format Display Mount is designed to support dual displays up to 86 inches. The heavy gauge steel ensures the mount does not bend from the weight of extra-large displays. The Dual Large Display mount is compatible with the following Avteq products:

    ELT-2000 floor stand

    ELT-2100 mobile cart

    3-Bay or larger credenzas

    * For displays larger than 86 inches, please contact your Avteq sales representation to ensure compatibility

     

     

  • Logitech Rally Bar Mount Front Angled View

    Logitech Rally Bar Mount

    Avteq’s Logitech Rally Bar mount bracket provides a secure installation of the Rally Bar above or below a display.  The Rally Bar mounting kit is ideal to center the Logitech Rally Bar when using dual displays.  The mounting bracket is designed to attach to the display mount providing additional flexibility with large-format displays.

    The Avteq Rally Bar Mount includes a display adapter that supports small (32-55 inches), medium (60-75 inches ), large (80-90 inches), or extra large (92-98 inches) display sizes.

    The Logitech Rally Bar Mount is compatible with Avteq display mounts, mobile stands, and collaborative furniture.

     

  • Logitech Tap IP In-Wall Mount LTAP-WMP with Touch Controller

    Logitech Tap IP In-Wall Mount

    Add security and easy access to the Logitech Tap IP meeting room control panel with Avteq’s in-wall mount.  The in-wall box allows all cabling to run through the walls, eliminating the need to find a power source or have cables running on tables and floors.

    The Logitech Tap IP in-wall mount provides a flush-mounted installation for post or pre-construction.  The in-wall box comes standard in a glossy white finish.

     

     

  • Logitech Wall Mount LTAP-SM Front View

    Logitech Tap Wall Mount

    The Logitech Tap wall mount is compatible with the Tap and Tap IP meeting control panel. The wall mount provides access to the Tap touch controls within meeting rooms or in hallways and open areas.

    The mount can be installed directly on the wall or attached to a 1-gang or 2-gang wall box for in-wall wiring applications Once the mount is installed, the Tap panel can easily be removed for tabletop access. The Logitech Tap wall mount comes standard in black.

     

  • mount for Mersive Solstice Pod

    Mersive Solstice Pod Mount

    The Mersive Solstice Pod mount securely supports the device on a wall, display mount, or desk. The Solstice Pod easily slides into the mount and then is secured with security screws.

    The Avteq mount allows access to the device’s ports without keeping it on a shelf or tabletop. Install the Mersive Solstice Pod to the wall, behind the display, or under a desk or tabletop.

     

  • PS-50 Camera Shelf Above

    PTZ Video Conferencing Camera Mount

    AVTEQ’s Video Conferencing Camera Shelf is designed for most PTZ and other video conferencing cameras. It positions the camera above or below 32-98” displays. For dual display applications, the camera shelf easily centers the camera at the top or bottom of the displays.

    A vertical bracket and one videoconferencing camera shelf attach to the Avteq UM-1 or UM-2 VESA mount. This shelf is compatible with most Avteq products.

     

  • Security Display Enclosure for Poly X30 Front View

    Security Display Enclosure for the Poly X30

    The Security Display Enclosures are designed to protect the audio visual technology and prevent anyone from using the hardware to inflict harm to themselves or others. The wall-mounted enclosure is customized specifically to support the Poly Studio X30 video bar along with a 32” or 43” display. The enclosure provides a safe and secure solution to mount the Poly Studio X30 and display in environments where the need for a safe video conferencing solution is essential, such as correctional or mental health facilities.

    The sloped top provides a non-looping enclosure that reduces the chance of the enclosure becoming a ligature point. All cabling and power access can be protected by the cover for maximum safety.
     

     

  • Yealink Meeting Bar Bracket with Camera Shelf

    Yealink MeetingBar Mount

    The Yealink MeetingBar Mount is a secure mount for installing a Yealink MeetingBar A20/A30 videobar above or below a display.  This Yealink mount provides a stable, long term solution for a professional video conferencing installation in the office.  It is compatible with the MeetingBar A20/A30 and is a secure mount for installing video bar on display.

    The Yealink Meetingbar Mount includes a display adapter that supports small (32-55 inches), medium (60-75 inches), large (80-90 inches), or extra large (92-98 inches) display sizes.

    The Yealink Meetingbar Mount is compatible with Avteq display mounts, mobile stands, and collaborative furniture.

     

  • Yealink MTouch In Wall Mount with Touch Panel Angled View

    Yealink MTouch In-Wall Mount

    The Yealink In-Wall Mount supports either the MTouch or CPT18 touch panels. The wall mount is designed for in-wall wiring installations and secures the Yealink touch panel within the box.

    Avteq’s Yealink In-Wall Mount provides added security from possible damage or loss of the unit and offers easy access to the touch screen controller for maximum usability. In addition, the in-wall box can be used for post or pre-construction installations. The wall mount comes standard in a glossy white finish.

     

     

  • cisco room kit mount

    Cisco Room Camera Mounts

    Add mobility to your Cisco® Room camera with our custom mounts for mobile display stands. The Cisco® Room camera mounts let you quickly install a Room Kit, Room Kit Plus, Room Bar, or Room Bar Pro on AVTEQ’s display mounts, mobile stands, and wall-mounted stands. These custom mounts make it easy to position the Room video bar above or below a display.

    The Cisco Room cameras bring your small or large meeting rooms to life.  When mounted on a mobile stand, the collaboration system brings the flexibility to adjust the environment to fit the needs of the team meeting.  For small huddle spaces, a mobile solution allows the camera to be moved to fit the size and location of the audience.  You are no longer dependent on a wall-mounted solution.

    The Cisco Room camera mounts are available as a bracket, or bundled with the AVTEQ universal display mount, which supports a single display up to 90″.

    It is compatible with the following Cisco cameras:

    • Cisco Room Kit
    • Cisco Room Kit Plus
    • Cisco Room Bar
    • Cisco Room Pro

    Installing the Cisco Room camera mounts on a mobile stand enhances the Cisco experience by providing mobility and flexibility in collaborative work environments.

     

  • DynamiQ mMount II with display

    DynamiQ mMount II Motorized Height Adjustable Mount

    The DynamiQ™ mMount II provides height adjustable capabilities with a motorized wall mounting system. The double-column design provides the stability needed to work with large interactive touchscreens up to 98” with a 440.9 lb total weight capacity.

    The wired remote controller may be placed at a convenient and easy-to-reach location, allowing the user to adjust the height of the screen safely and quietly. The motorized mount has a dual anti- collision feature to prevent accidental pinching, when the system is moving and senses an obstruction it will stop and retreat. In its lowest position, the monitor allows easy access for users in wheelchairs.

    A lockbox is located on the back of the VESA mounting box, which safely stores the electric controls. The lockbox also may be used for a mini PC or other small equipment.

    With the optional accessories, the product may be equipped for use with a laptop or keyboard tray, teleconferencing equipment, camera, or sound bar.

    GEAR Box-sm Contact AVTEQ to discuss custom solutions.

     

  • height adjustable DynamiQ 400 wall mount

    DynamiQ 400 Height Adjustable Mount

    The DynamiQ™ 400 height adjustable wall mount is the perfect solution for interactive touch panels in the classroom and other collaborative spaces.  The mount is compatible with most interactive panels and supports VESA patterns from 200×200 up to 800×600.

    The DynamiQ 400 wall mount uses spring technology to support the display and provides easy glide vertical movement with a slight manual touch.  The height-adjustable mount supports 15.75″ of vertical movement and supports displays from 40 to 209 lbs.

     

  • Height adjustable wall mount - BalanceBox 650

    DynamiQ 650 Height Adjustable Wall Mount

    The DynamiQ™ 650 is the perfect height adjustable mount to move your large interactive touch screen displays up and down. This mechanical wall lift has a weight capacity up to 357 lbs in a compact design that will be hidden behind the screen. Interface brackets for all screen sizes, a floor support and a mobile frame are available as accessories.

     

  • PTZ-WM Wall Mount Front Angled View with PTZ Camera

    PTZ Wall Mount

    The Avteq PTZ Wall Mount supports any PTZ camera with a 1/4”-20 interface. The mount is designed to install directly to a wall or a single-gang wall box and position the camera above or below a display. The camera mount is made from heavy gauge steel.

     

     

  • NEAT BAR BRACKET with camera angled front view

    Neat Bar and Bar Pro Mount

    Add mobility to your Neat Bar experience with AVTEQ’s Neat Bar Mount for mobile carts, floor stands and credenzas. Our custom mount bracket lets you quickly position the Neat Bar video bar above or below the display and supports:

    Create dynamic, flexible huddle areas and allow your employees to adjust the space for maximum collaboration.

    GEAR Box-sm Contact AVTEQ to discuss custom solutions.

     

  • Poly Studio X30X50 Mount Without Camera Front Angled View

    Poly Studio Mount Bracket

    Add mobility to your Poly Studio experience with AVTEQ’s Poly Studio Mount Bracket for mobile stands. Our custom mount bracket lets you quickly position the Poly Studio video bar above or below the display and supports:

    Create dynamic, flexible huddle areas and allow your employees to adjust the space for maximum collaboration.

    GEAR Box-sm Contact AVTEQ to discuss custom solutions.

     

  • Neat Frame Floor Stand Front View

    Neat Frame Floor Stand

    The Neat Frame Floor Stand supports the Neat Frame tablet. The stand is perfect for open area meeting rooms, lobby displays, a virtual assistant in office lobbies, and other spaces where wall mounting is not an option.

    Its sturdy, free-standing design makes it easy to move and place the stand where needed.

     

     

  • Wall mount for Cisco Touch 10

    Cisco Touch 10 Surface Wall Mount

    The Cisco Touch 10 Surface Wall Mount is designed for the Cisco Touch 10 control unit for MX, SX, Board, and Room Series.

    The mount is installed directly on the surface of the wall or attached to a 1-gang or 2-gang wall box.  Once the mount is installed, the Touch 10 unit easily slides into the mount and is secured with a set screw at the bottom of the mount.  The Touch 10 Surface Mount is available in white.

    If you prefer to install your Touch 10 unit flush to the wall, AVTEQ offers an in-wall mount.

     

  • Poly GC8 Mount GC8-WMP and GC8-SM

    Poly GC8 Wall Mounts

    Poly GC8 mounts are available in an in-wall or surface wall mount model. These mounts add security and reliability to your GC8 panel which works seamlessly with the Poly Studio X family and G7500. Poly GC8 in-wall mount adds security and accessibility to the GC8 panel in your Microsoft Teams rooms.  The GC8 panel is compatible with the Poly G10-T, Poly G40-T, and Poly G85-T.

    Installing the GC8 on the wall prevents possible damage and loss of the unit and provides easy access to the touch screen controller for maximum usability. The panel fits securely inside the in-wall box. In addition,  the in-wall box fits within a standard wall depth and the faceplate secures the GC8 panel. The mount works with pre-construction or post and comes standard in a glossy white finish.

    AVTEQ also offers a surface wall mount that is installed directly on the wall or attached to a 1-gang or 2-gang wall box. Once the mount is installed, the GC8 panel easily slides into the mount and is secured with a set screw at the bottom of the mount. The surface mount comes standard in black.

    For more information about other Poly mounting solutions, see our Poly Solutions page.

     

  • Poly TC8 Mounts TC8-WMP and TC8-SM

    Poly TC8 Wall Mounts

    Poly TC8 mounts are available in an in-wall or surface wall mount model.  These mounts add security and reliability to your TC8 panel which works seamlessly with the Poly Studio X family and G7500.  The Poly in-wall box is designed specifically for the Poly TC8 touch panel.

    Installing the TC8 on the wall prevents possible damage and loss of the unit and provides easy access to the touch screen controller for maximum usability.  The panel fits securely inside the in-wall box. The in-wall box fits within a standard wall depth and the faceplate secures the TC8 panel. The mount works with pre-construction or post and comes standard in a glossy white finish.

    AVTEQ also offers a surface wall mount that is installed directly on the wall or attached to a 1-gang or 2-gang wall box.  Once the mount is installed, the TC8 panel easily slides into the mount and is secured with a set screw at the bottom of the mount.  The surface mount comes standard in black.

    For more information about other Poly products, see our Poly Solutions page.

     

  • LED-1

    For a more low-profile wall mount, this solution is ideal for LED displays from 40″ to 70″. Mounting system includes a bubble level for best installation results.

  • Cisco Board Mounting Kit

    The Cisco® Board Mounting Kit is certified compatible with the Cisco® Board and Cisco Board Pro series:

    • Cisco Board 55
    • Cisco Board Pro 55
    • Cisco Board 70
    • Cisco Board Pro 75
    • Cisco Board 85

    The mounting kit allows for wall mounting or installed on an AVTEQ mobile cart or stand.  The Cisco Mounting Kit is integrated with select products including:

    The Cisco Board Mounting Kit also can replace the standard display mount on AVTEQ’s credenzas.

     

  • UM-1 Universal wall mount

    Universal Display Wall Mounts for Single & Dual Displays

    AVTEQ’s UM-1 single display wall mount gives you the flexibility you need to securely wall mount single displays up to 98″.  The UM-1 easily adjusts to support a single display from 45 to 98 inches. The UM-1 single display mount comes standard on AVTEQ’s mobile carts, stands, and credenzas. 

    For dual displaying mounting, Avteq’s UM-2 dual display wall mount adjusts to supports dual displays up to 82″. TAA compliant.